Bigwater -T QC 75 GPD quick change reverse osmosis water filter+tank+pump, standard

Experience soft, full-bodied taste, pure water without a guilty conscience, healthy, detoxifying effect.
Small, slim, flat, elegant design, that is what characterizes this new reverse osmosis system. Fits under almost every sink

NOT included in delivery:

, standard version

, but standard version with thinner wall thickness

Dimensions, width, length, height in cm:
14x 41 x 43
Weight: 7 Kg

1st stage: QUICK Filter GAC: Reduces chemical substances, breaks down chlorine.
2nd stage: QUICK Filter PP 5 microns: Filters sand, dirt, rust particles
3rd stage: QUICK Membrane 75 GPD: Main filter unit, the power unit, filters down to 0.0001 microns: Filters viruses, bacteria, chemicals, heavy metals, fluorine, lime, etc.
4th stage: QUICK post-filter coconut activated carbon: post-filter, last protection stage
5th level Optional: Negative ion energizer, or biophotons

Filter change:

Level 1,2+4, every 6 months
Stage 3, the membrane, every 2 years

Choose tap variants with 1 way and 3 way taps as you like:

For technical reasons:

Note: Every reverse osmosis system produces pure water and waste water at the same time. This pure water to waste water ratio depends on the following factors: tap water pressure; temperature; conductivity; degree of hardness; iron content; flow limiter, etc. Only an approximate value can be given, which for this system is approx. 1 to 3-5. This means that for 1 liter of pure water, the system produces 3 - 6 liters of waste water. This is due to technical reasons and is independent of this product. ---> 1 way valve with waste water outlet

*: At lower water pressures the filtration rate decreases.

- Filtration performance: With an input water conductivity of assumed 250mg/l = ppm / 500µS you get 12 ppm / 25 µS* pure water value

*: Depending on water quality such as conductivity and hardness, temperature

Water requirement:

• Water pressure, min. 3 bar, max. 6 bar
• Water temperature: Min. 2°C max. 45 °C
• Input water, mg / l, max. 600 (ppm) / 1200 µS
• Iron content max. 0.2 mg / L
• pH value: 3 - 11
• Hardness: Max. 22 °dH
• Only suitable for drinking water filtering

Filter change intervals:

Every 6 months: 1st stage: Inline 2.0'' QUICK Filter PP 5 micron: Filters sand, dust, rust particles
Every 6 months: 2nd stage: Inline 2.0'' QUICK Filter GAC: Reduces chemicals, breaks down chlorine.
Every 6 months: 3rd stage: Inline 2.0'' QUICK Filter CTO: Reduces chemicals, breaks down chlorine.
Every 2 years: 4th stage, membrane 75 GPD: main filter unit, the power unit, filters down to 0.0001 microns: filters viruses, bacteria, chemicals, heavy metals, fluorine, lime, etc.
Every 6 months: 5th stage: Inline 2.0'' QUICK post-filter coconut activated carbon: post-filter, last protection stage

- Scope of delivery:
Ready-to-install 5-stage reverse osmosis system with 75 GPD membrane; 5.5 liter tank (plastic or metal, none is better), pre-assembled including all filters; 1-way retro look osmosis tap, water connection 3/8", mounting accessories, assembly instructions, hoses, tank valve, drain clamp